Connect website through LAN without internet using WAMP server | 2my4edge

10 March 2015

Connect website through LAN without internet using WAMP server

how to connect two or more systems with LAN cable and how to working with Offline website with LAN connection using IP address. we have to install WAMP server. if you don't have it. Download from the link. http://www.wampserver.com/. here i'm going to tell you step by step process for how to connect a web site without internet using LAN.

Main connect web page without internet

STEP 1 
First we have to find our IP address of our system, so we have to open command promt. WINDOWS KEY + R --> Run Command. there you have to type CMD to command promt. there you can see you IP address of you system.

Run comment short cut

STEP 2
In the command promt, Enter IPCONFIG to find IP address of your system. in the below image, underlined thing. you have to do. and then you can see the IPv4 Address. that is your IP address. 

Run comment to find ip address

STEP 3
Type that IP address in your web browser, after turn ON your WAMP server. you will get the forbetten access page like the below.

web site forbidden access

STEP 4
In the notification area, click on the WAMP icon. you will get like the below image. there open the httpd.conf file. that will opens in notepad.

wamp httpd.conf file

STEP 5
In the notepad, find onlineoffline tag like the below high lighted thing.

note pad edit

you have change some lines over there. in that notepad. we have to comment those two lines. 

Order Deny, Allow
Deny from all

STEP 6
note pad edit

We have comment that two lines by using #. if you are using # before that line,  it will not execute that line. and we have to add one new line 

Allow fro all

after adding that line, save that conf file and close it.

Step 7
After that we have to Restart the WAMP services,

Re start Wamp

After Restart all the services. open the browser and enter the IP address in your browser. that will open the web page. and the connect the LAN cable or if it is same WIFI between two or more system. enter the same IP address. the page will open. there we don't want to turn on the WAMP server and all. the IP address system is server system. other systems are client systems. and make sure turn off the Firewall settings.

OUTPUT

two systems in single lan

I hope this post is really helpful to every one. thanks for your attention. keep visiting for more tutorials. Keep stay connected though social media. If any problem in connecting this. comment below. i will help you.

5 comments:

  1. Connect website through LAN without internet using WAMP server

    That was a great tuts, But i need it on XAMPP too thanks

    ReplyDelete
    Replies
    1. @ KOODIE Hubs

      For XAMPP..? Turn ON the Xampp Apache service and MySql service, you can directly Enter the URL with the IP address.. It will take. Try that.

      For XAMPP No Need to do any thing.. Directly work with IP address

      Thank you..

      Delete
  2. @ KOODIE Hubs

    For XAMPP..? Turn ON the Xampp Apache service and MySql service, you can directly Enter the URL with the IP address.. It will take. Try that.

    For XAMPP No Need to do any thing.. Directly work with IP address

    Thank you..

    ReplyDelete
  3. But in my pc it doesn't work ...what to do?

    ReplyDelete
  4. The DSL is also called an "always on" connection, as it uses a 2-wire copper phone line. It also does not stop you from using your telephone while using the internet because of the 2-wire copper phone line.antique tractor pulling

    ReplyDelete

^